GBB parts

Keep your Vorsk VMP running true with this genuine 1 Joule replacement air nozzle, purpose-built for the VMP-1 and VMP-2 gas blowback platforms. Set right at the 1J limit commonly applied across Irish airsoft sites, it's a straightforward, site-ready choice for regular skirmish use. Built from high-quality polymer for a precise seal and consistent air delivery, it's a simple swap that restores smooth cycling once your factory nozzle starts to wear or leak.

Key features:

• 1 Joule power output (~330 FPS with 0.20g BBs) — within the standard 1J site limit used in Ireland
• Purpose-built fit for Vorsk VMP-1 and VMP-2 GBB SMGs
• Durable, high-quality polymer construction for a reliable, consistent seal
• Easy drop-in replacement — no modification required

Always check your local site's power limits before use.

The Maple Leaf Crazy Jet Precision Inner Barrel (6.04x370mm) is a tight-bore upgrade barrel for GBB replicas, improving accuracy and consistency over a stock barrel with precise internal tolerances.

Key features:

• 6.04mm tight-bore diameter, 370mm length
• Precision-machined for improved accuracy
• Compatible with GBB platform replicas

A genuine Novritsch replacement slide for the SSP18 GBB pistol, giving you a direct-fit part for repairs or customisation in Black metal construction.

Key features:

• Genuine Novritsch replacement slide
• Compatible with SSP18 GBB pistols
• Metal construction, Black finish

A complete replacement hammer assembly for KJW 1911-pattern GBB pistols, restoring reliable striking and cycling once the original hammer wears out or breaks. A straightforward internal maintenance part for keeping your 1911 GBB running properly.

Key features:

• Complete hammer assembly for KJW 1911-pattern GBB pistols
• Restores reliable striking and cycling
• Direct-fit replacement part

A direct replacement magazine feed lip for Tokyo Marui Hi-Capa 5.1/4.3 magazines by Guarder, restoring smooth, reliable BB feeding once your original lip has worn, chipped, or cracked.

Key features:

• Direct replacement feed lip for Marui Hi-Capa 5.1/4.3 magazines
• Restores smooth, consistent BB feeding
• Black finish

This is the complete hammer unit for the APS ACP CO2 pistol, including the housing, springs, pins, and hammer needed for a full internal rebuild. It's the go-to fix for common ACP/Glock-pattern GBB issues like a sticking slide or inconsistent cycling, restoring smooth blowback and reliable shot-to-shot performance.

Key features:

• Complete hammer unit: housing, springs, pins, and hammer included
• Fits APS ACP CO2 pistols and compatible aftermarket builds
• Resolves sticking slide and inconsistent cycling issues
• Built to APS's original specification for a precise fit

A straightforward maintenance part for players who want to keep their sidearm running like new rather than replacing the whole pistol.

A direct replacement magazine feed lip for Hi-Capa pattern GBB magazines, designed to restore smooth, reliable BB feeding once your original lip has worn, chipped, or cracked. A simple maintenance part that keeps your Hi-Capa magazines cycling properly instead of needing a full magazine replacement.

Key features:

• Direct replacement feed lip for Hi-Capa pattern GBB magazines
• Restores smooth, consistent BB feeding
• Straightforward, low-cost fix for worn or damaged magazine lips

A CNC stainless steel reinforced bottom screw designed to replace the original, weaker fastener on WE Glock-series CO2 magazines. Over time and repeated CO2 changes, the factory screw can strip or wear — this stainless replacement holds up to repeated use and keeps your magazine base secure.

Key features:

• CNC-machined stainless steel construction
• Direct replacement for WE G-series CO2 magazine bottom screws
• Resists stripping and wear from repeated CO2 cartridge changes

This EPeS GasRoute washer fits between the GasRoute and the magazine body on TM/WE Glock-pattern GBB magazines, improving the seal between the GasRoute and the piston for more consistent gas delivery. A small, inexpensive fix worth trying if your Glock GBB magazine is losing gas or cycling inconsistently.

Key features:

• Improves the seal between GasRoute and piston
• Fits TM/WE Glock-pattern GBB magazines
• Simple, low-cost upgrade for gas efficiency and consistency

Note: not every magazine needs this washer — fit only if you're experiencing gas leaks or inconsistent cycling.

This Novritsch thread adapter converts the internally-threaded barrel of your SSP1 or SSP5 series pistol into a standard 14mm CCW external thread, opening it up to tracer units, suppressors, and other muzzle devices. It's an original Novritsch part, so fit is guaranteed on compatible pistols.

Key features:

• Converts SSP1/SSP5 internal thread to 14mm CCW external thread
• Compatible with standard tracer units and suppressors
• Genuine Novritsch part for a guaranteed fit

Note: on the SSP1's dropping barrel design, heavier muzzle devices may affect cycling — a short/lightweight tracer unit is recommended.

The Guarder Enhanced Loading Nozzle is a direct upgrade for the Tokyo Marui G18C Gen3 GBB pistol, improving gas efficiency and feeding consistency over the stock nozzle. Nozzle only — no other parts included.

Key features:

• Enhanced loading nozzle for improved gas efficiency
• Compatible with Tokyo Marui G18C Gen3 GBB
• Nozzle only, Black finish

The Guarder Enhanced Loading Nozzle is a direct upgrade for Tokyo Marui G17/22/26/34 Gen3 GBB pistols, improving gas efficiency and feeding consistency over the stock nozzle.

Key features:

• Enhanced loading nozzle for improved gas efficiency
• Compatible with Tokyo Marui G17/22/26/34 Gen3 GBB pistols

The Cowcow Pink Mood Enhanced Loading Nozzle is a direct upgrade for Tokyo Marui 1911/Hi-Capa GBB pistols, improving gas efficiency and feeding consistency over the stock nozzle, finished in a distinctive Pink Mood colourway.

Key features:

• Enhanced loading nozzle for improved gas efficiency
• Compatible with Tokyo Marui 1911/Hi-Capa GBB pistols
• Distinctive Pink Mood finish

The COWCOW Aluminum Dynamic Blowback Housing is a CNC-machined upgrade for the Tokyo Marui Hi-Capa 5.1 GBB series, giving a snappier, more dynamic blowback cycle and added durability over the stock plastic housing.

Key features:

• CNC-machined aluminium construction
• Improves blowback feel and durability
• Direct fit for Tokyo Marui Hi-Capa 5.1 GBB series

The APS Exhaust Valve for CO2 is a direct replacement part for APS G./Dragonfly/Mantis/ACP/Scorpion CO2 magazines, restoring proper gas exhaust function once the original valve starts to leak or stick.

Key features:

• Compatible with APS G./Dragonfly/Mantis/ACP/Scorpion CO2 magazines
• Restores proper gas exhaust function
• Brass and rubber construction

The Guarder Light Weight Nozzle Housing for Hi-Capa 5.1/4.3 GBB reduces reciprocating mass for a snappier blowback cycle, improving feel and potentially reducing wear on internals over time.

Key features:

• Lightweight construction for a snappier blowback cycle
• Direct fit for Tokyo Marui Hi-Capa 5.1/4.3 GBB
• Grey finish