Ammo & Power

Elite Force Green Gas (560ml, 150psi) is a silicone-oil-content gas designed for GBB rifles, giving optimum function even at lower temperatures and coming with a stainless steel nozzle.

Key features:

• 560ml canister, 150psi rating
• Formulated for GBB rifles
• Optimum performance at low temperatures (2.5°C to 14°C)
• Stainless steel nozzle

Always check your GBB replica's rated gas type before use.

Evolution 0.20g BBs give you precision-weighted, polished ammo for consistent, accurate shooting — a solid, reliable choice for everyday skirmish use.

Key features:

• 0.20g weight, precision polished
• Consistent weight for reliable hop-up performance

ULTRAIR Green Gas from ASG is a mid-pressure propellant blended with a silicone lubricant that conditions the internal seals and o-rings of gas blowback pistols and rifles every time you fill a magazine. Running at roughly 135 PSI, it strikes a balance between snappy blowback and consistent FPS across a range of ambient temperatures, without the harshness of higher-pressure red or black gas blends. The 570ml can is sized to top off magazines for a full day of GBB shooting.

Specna Arms CORE 0.28g biodegradable BBs, packed 3,500 to a bag. The heavier 0.28g weight resists wind drift better than lighter BBs, giving more consistent, accurate shots at medium range while staying gentle on hop-up units.

Engineered for consistent performance, these premium-grade 12g CO2 cartridges are built for airsoft pistols, air rifles, and other CO2-driven gear. This pack of 10 keeps you stocked with reliable gas whenever you need it.

Key features:

• 10x individually sealed 12g CO2 cartridges
• Pure, high-grade gas for steady pressure and reliable accuracy
• Universal sizing, compatible with most CO2-powered equipment
• Durable, leak-proof design for extended shelf life

Warning: cartridges are pressurised — never puncture or expose to temperatures above 50°C (122°F). Store away from children.

The FUEL 7.4V 1200mAh Stick LiPo battery (15C) is designed for compact AEGs and tight stock compartments, delivering reliable power in a slim, space-saving form factor.

Key features:

• 7.4V nominal voltage, 1200mAh capacity
• 15C discharge rate, slim stick form factor
• Small Tamiya connector

Always use a LiPo-specific balance charger and never fully discharge a LiPo battery.

Specna Arms' CORE line of 0.30g BBs is precision-milled and polished for a smooth, consistent surface that reduces hop-up wear and feeding jams in AEGs and GBBs alike. The 0.30g weight is a solid all-rounder for outdoor fields, holding a flatter trajectory than lighter BBs while still cycling reliably through stock internals. Bottled 3000 to a container with a resealable cap for easy loading and storage between games.

The FUEL Li-Po Battery (7.4V 1300mAh 25C Stick) is a compact, high-performance LiPo pack designed for airsoft AEGs and RC vehicles/drones, giving strong power delivery in a slim stick form factor.

Key features:

• 7.4V nominal voltage, 1300mAh capacity
• 25C discharge rate, slim stick form factor
• Small Tamiya connector

Always use a LiPo-specific balance charger and never fully discharge a LiPo battery.

Specna Arms' EDGE ULTRA line steps up the polish and roundness tolerance over their standard BBs, giving these 0.32g pellets a noticeably smoother path through the hop-up chamber for tighter, more consistent groupings. The 0.32g weight suits upgraded AEGs and DMRs running higher FPS or longer barrels where accuracy at range matters. Supplied in a 2700-count bottle with a resealable cap for convenient loading.

This 7.4V 1500mAh 25C Li-Po stick battery from Gens Ace packs a compact footprint into most airsoft stock tubes and handguards, trading NiMH bulk for lighter weight and a steadier rate of fire. Li-Po chemistry means there's no need to fully discharge the pack before recharging, making it easy to top up between games. Comes fitted with a Deans-type (DeanT) connector for a firm, reliable electrical connection.

Swiss Arms 110 PSI Light Gas is a no-silicone, lower-pressure gas suited to GBB pistols that need gentler treatment than a heavy gas blend would provide, helping protect internals on more delicate builds.

Key features:

• 110psi light gas blend
• No silicone content
• Suited to GBB pistols needing gentler gas pressure

Always check your GBB replica's rated gas type before use.

This 7.4V 1500mAh 25C Li-Po battery from Gens Ace is built specifically for airsoft AEGs, with a compact stick profile that slips into most stock tubes and handguards. Its lightweight Li-Po construction packs more energy density than a same-sized NiMH pack, helping your gearbox hold a steady, consistent rate of fire throughout a match. Fitted with a Mini Tamiya connector for easy compatibility with common airsoft wiring setups.

Nuprol 3.0 Extreme Power Gas (180psi, 1L) is designed to make your gas airsoft gun more consistent from shot to shot and to perform far better in cold conditions than standard green gas.

Key features:

• 1L canister, extreme performance 180psi rating
• Improved shot-to-shot consistency over green gas
• Better cold-weather performance

Always check your GBB replica and site rules are suitable for high-performance gas before use.

A simple Tamiya-to-T-connector converter, letting you run a Tamiya-connector battery in a replica or charger wired for the T-connector (Deans-style) standard without rewiring or soldering.

Key features:

• Converts Tamiya connector to T-connector
• Simple plug-in adapter, no soldering required

This 7.4V 1300mAh 25C split (2x) Li-Po pack from Gens Ace is shaped to fit narrow battery compartments and crane-style stocks where a single stick battery won't fit. The dual-cell design keeps the overall pack slim while still delivering plenty of current for a fast, consistent trigger response. Terminated with a Deans-type (DeanT) connector for a secure, low-resistance power connection.

These 0.40g BLS Stainless UH pellets are precision-polished 6mm BBs designed to fly true from longer inner barrels and tightened hop-up units, making them a solid pick for DMRs and upgraded AEGs. The higher weight resists wind drift better than lighter BBs and carries more consistent energy downrange for improved accuracy at distance. Packed 2500 to a bag, they're an economical option for players who go through ammo fast on skirmish days.

The FUEL NiMh Battery (9.6V 1600mAh Nunchuck) is a high-performance NiMH pack designed for airsoft AEGs, giving reliable power delivery in the popular nunchuck form factor.

Key features:

• 9.6V nominal voltage, 1600mAh capacity
• Nunchuck form factor
• Small Tamiya connector

VORSK V6 Performance GBB Fuel is a high-performance gas blend formulated for VORSK's gas blowback platform, giving strong, consistent recoil and cycling performance.

Key features:

• High-performance gas blend for GBB replicas
• Strong, consistent recoil and cycling

Always check your GBB replica and site rules are suitable for high-performance gas before use.

Specna Arms CORE BBs are a reliable ammo choice for all types of 6mm airsoft guns — pistols, rifles, SMGs, machine guns, and sniper rifles alike — whether powered by AEG, GAS, HPA, or manual spring systems. Already a trusted name in airsoft, Specna Arms now brings that same reputation to its own line of high-quality BBs.

These precisely manufactured 6mm BBs hold a tolerance of 5.95mm ± 0.01mm, making them suitable even for precision barrels. Each CORE BB is polished to a high-gloss finish during final processing, and full in-house quality control ensures perfectly round BBs for flawless feeding and a consistent hop-up effect.

Specna Arms BB Product Lines

1. ULTRA EDGE™ — The top-tier line, made in the same factory as G&G. Premium-grade BBs built for ultra-precision sniper barrels, with a 5.95mm (±0.001mm) size tolerance and ±0.01g weight tolerance. A special surface finish reduces in-barrel vibration and improves hop-up rubber contact for outstanding grouping.
2. ONE™ — High-performance BBs with a great price-to-performance ratio, sitting between ULTRA EDGE™ and CORE™. Ideal for players who love holding down the trigger. A 5.95mm (±0.005mm) tolerance and ±0.01g weight accuracy make these perfect for all guns, including 6.01 barrels.
3. PRIME™ — Excellent value-for-money BBs with slightly looser tolerances (5.95mm ±0.01mm, ±0.01g) than the ONE™ line, suited to 6.03mm or wider barrels. A great fit for standard setups, LMGs, SMGs, wide-bore DMRs, HPA builds, and sniper rifles, with excellent glide and precision shape for top-tier range and accuracy.
4. CORE™ — Still high-quality BBs, made more affordable through lower production costs. Compatible with all barrels and guns, perfectly round with great glide. The surface finish is less premium than ULTRA EDGE™, but dimensions (5.95mm ±0.005mm) and weight tolerance (±0.01g) match the ONE™ line.

A Note on BB Care

BB quality and cleanliness matter just as much as your barrel and hop-up rubber when it comes to accuracy. Keep your BBs protected from dirt (for example, while crawling with loaded mags), and clean your inner barrel regularly to avoid performance issues.

Key Features

• Precision tolerance: 5.95mm ± 0.01mm, suitable for precision barrels
• High-gloss polish: Smooth, consistent surface finish
• In-house quality control: Perfectly round BBs for flawless feeding
• Consistent hop-up effect: Reliable spin and trajectory
• Universal compatibility: Works with AEG, GAS, HPA, and spring-powered platforms